In order to ensure that a heat pump always works the way it should, it must be properly installed.  If after install the pump fails to work appropriately, there are a few troubleshooting steps the pool owner can take.  First off, the installed ground heat pump requires 50 cm of clear area around the entire device in order to work properly; the device needs this so that the ventilation system can work.  Inappropriate spacing around the device will eventually cause the device to become inoperable.  If the heat pump has been improperly installed in an enclosed area, it will need to be moved to ensure adequate ventilation at all times.

The heat pump also requires the right amount of electricity flowing to it in order to prove functional.  If the requirements for electricity are not met and the appropriate sized cables are not used, again the device will not work.  In addition, if the owner is to derive the silent operation features supplied by an in ground heat pump, then the pump must be situated on a perfectly levelPsychology Articles, flat location.  It is a good idea to have an expert make the initial install of the heat pump so that the device is set up correctly.

Company Resource:   Heat Pump, Household Heat Pump, Swimming Pool Heat Pump, Mini-chillers
Read more:  http://www.cn-skysea.com/news/