In order to ensure that a heat pump always works the way it should, it must be properly installed.  If after install the pump fails to work appropriately, there are a few troubleshooting steps the pool owner can take.  First off, the installed ground heat pump requires 50 cm of clear area around the entire device in order to work properly; the device needs this so that the ventilation system can work.  Inappropriate spacing around the device will eventually cause the device to become inoperable.  If the heat pump has been improperly installed in an enclosed area, it will need to be moved to ensure adequate ventilation at all times.

Company Resource:   Ground Source Heat Pump, Industrial Air Conditioner, Air Source Heat Pump,Modular Air Conditioner
Read more:  http://www.cn-skysea.com/news/